Процесен контролер ATR144
|
- product description
- company profile
product description
Product Description:Процесен контролер ATR144 е последното издание на контролорите на Pixsys со големина 32x74 mm, интегрирајќи ги неодамнешните novini на Blue line кои се воведени со ATR244. Се издвојува so светлиот дисплеј, обезбедувајќи оптимална видливост во индустриските средини и овозможувајќи повеќе информации за операторот .
Мулти-напонско напојување од 24 до 230V AC / DC со галванска изолација не бара никаков избор на хардвер. Ima i iзборна сериска комуникација преку RS485 со протокол Modbus RTU / Slave.
Ordering codes
ATR144-ABC
1 analogue input + 2 relays 5 A + 1 D.I/O - Supply 24..230 V AC/DC
ATR144-ABC-T
1 analogue input + 1 relay 5 A + 1 D.I/O + RS485 - Supply 24..230 V AC/DC
Main features
Enclosure
32 x 74 (front) x 53 mm
Power supply
24..230 V AC / DC ±15% 50/60 Hz - galvanic isolation 2,5KV
Consumption
5 VA
Display
4 digits 0,38" white + 5 digits 0,28" red
Environmental conditions
Temperature 0-45 °C, humidity 35..95 RH%
Material
Enclosure: PC UL94V2 self-extinguishing. Front: PC UL94V2
Weight
approx. 120 g
Sealing
Front panel: IP65 (with gasket). Enclosure and terminal block: IP20
Quick set-up options
Memory Card, LABSOFTVIEW software, EASY-UP codes
APP / NFC
Programming via APP (NFC) for Android devices
Inputs
1 analogue / configurable
Resolution 16bit, programmable for thermocouples K, S, R, J, T, N, B (automatic compensation of cold junction) -25..85°C, ±0,2% F.S. ±1 digit F.S.), Thermoresistances PT100, PT500, PT1000, Ni100, PTC1K, NTC10K (β 3435K), process signals 0..10 V (50000 points), 0/4..20mA (40000 points), 0..60 mV (25000 points), potentiometer 1..150 KΩ (50000 points)
Sampling time
Programmable till 2,1 ms (frequency up to 470 Hz)
1/2 Digital
Setpoint change, Hold, Run, Tuning, Start / Stop, configuration lock
Outputs
1/2 Relays
5 A - 250 V AC resistive
1 SSR
12 V DC - 25 mA max
Serial communication
RS485 Modbus RTU - Slave (4800..115200 baud) Code "-T"
Software features
Control algorithms
ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time-proportioned
Tuning
Manual or automatic
Data protection
Lock of Command/Alarm Setpoints - Access to parameters by Password
Alarm modes
Absolute/ threshold, band, upper/lower deviation, Alarms with optional manual reset and activation delay, Loop Break Alarm.
Dual PID
Heating / cooling PID
Soft-Start
Rising gradient programmable as Degree / hour or fixed output %
Open/Close logics
Motorised valves
Мулти-напонско напојување од 24 до 230V AC / DC со галванска изолација не бара никаков избор на хардвер. Ima i iзборна сериска комуникација преку RS485 со протокол Modbus RTU / Slave.
Ordering codes
ATR144-ABC
1 analogue input + 2 relays 5 A + 1 D.I/O - Supply 24..230 V AC/DC
ATR144-ABC-T
1 analogue input + 1 relay 5 A + 1 D.I/O + RS485 - Supply 24..230 V AC/DC
Main features
Enclosure
32 x 74 (front) x 53 mm
Power supply
24..230 V AC / DC ±15% 50/60 Hz - galvanic isolation 2,5KV
Consumption
5 VA
Display
4 digits 0,38" white + 5 digits 0,28" red
Environmental conditions
Temperature 0-45 °C, humidity 35..95 RH%
Material
Enclosure: PC UL94V2 self-extinguishing. Front: PC UL94V2
Weight
approx. 120 g
Sealing
Front panel: IP65 (with gasket). Enclosure and terminal block: IP20
Quick set-up options
Memory Card, LABSOFTVIEW software, EASY-UP codes
APP / NFC
Programming via APP (NFC) for Android devices
Inputs
1 analogue / configurable
Resolution 16bit, programmable for thermocouples K, S, R, J, T, N, B (automatic compensation of cold junction) -25..85°C, ±0,2% F.S. ±1 digit F.S.), Thermoresistances PT100, PT500, PT1000, Ni100, PTC1K, NTC10K (β 3435K), process signals 0..10 V (50000 points), 0/4..20mA (40000 points), 0..60 mV (25000 points), potentiometer 1..150 KΩ (50000 points)
Sampling time
Programmable till 2,1 ms (frequency up to 470 Hz)
1/2 Digital
Setpoint change, Hold, Run, Tuning, Start / Stop, configuration lock
Outputs
1/2 Relays
5 A - 250 V AC resistive
1 SSR
12 V DC - 25 mA max
Serial communication
RS485 Modbus RTU - Slave (4800..115200 baud) Code "-T"
Software features
Control algorithms
ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time-proportioned
Tuning
Manual or automatic
Data protection
Lock of Command/Alarm Setpoints - Access to parameters by Password
Alarm modes
Absolute/ threshold, band, upper/lower deviation, Alarms with optional manual reset and activation delay, Loop Break Alarm.
Dual PID
Heating / cooling PID
Soft-Start
Rising gradient programmable as Degree / hour or fixed output %
Open/Close logics
Motorised valves
Category:Regulators
Seller:Set еlektronik
company profile
Set еlektronik
- Company introduction:Set Elektronik postoi od 1994 god.Rabotime so rezervni delovi od oblasta na elektronikata, monta`a i proda`ba na mernoregulaciona oprema ,zastapni{tva na nekolku svetski renomirani firmi od ovaa oblast , in`enering,izveduvawe i monta`a na industriski ormari za kontrola i regulacija na procesno vodewe ,temperatura,pritisok. 1.Frekventni regulatori Prvenstveno sme orientirani na Frekventni i DC Regulatori, HMI TouchScreens i ostanatata cela programa od SSD-PARKER www.SSDdrives.uk ; , Solar Energy , Wind Energy ostanata cela programa od SANTERNO www.santerno.COM 2.Soft starteri SANTERNO i LED osvetluvawe so zasteda do 80% 3.Osigura~ka oprema Potoa vo na{ata programa ja imame i najgolemata firma za osigura~ka oprema FERRAZ za nizok ,sreden i visok napon koja {to pokriva 35% od svetskiot pazar za osigra~ka oprema www.ferrazshawmut.com 4.Elektromotori Santerno 5.PEPPERL+FUCHS Lokalen diler za Pepperl+Fuchs Mannheim Germany 6.PIXSYS designs and manufactures industrial automation systems, measure instruments and process controllers.
- Contact Person Name:Сет електроник
- Address:Добромир Хрс 51-б
- Post Code:1000
- City:Skopje , Macedonia
- Cell Phone #:070 245495
- Telephone #:02 2627527
- Fax #:02 2627527
- Geo Location:Show
