PALLET STRETCH WRAPPING MACHINE FP35 - FP35/S
|
- product description
- company profile
product description
Product Description:•TURNTABLE DIAMETER : 1500/1800/2000 mm
•TURNTABLE ROTATING SPEED: 10 r.p.m. (FIXED) ON THE FP35 VERSION / ADJUSTABLE FROM 7 TO 15 r.p.m. ON THE FP35/S VERSION
•MAX. LOADING CAPACITY and MAX. PALLET DIMENSIONS : depending from the machine execution
•MAX. HEIGHT OF THE FILM ROLL : 500 mm
•MAX. DIAMETER OF THE FILM ROLL : 300 mm
•PHOTOCELL FOR THE AUTOMATIC PALLET HEIGHT DETECTION
•FP35/S: MAIN CONTROL BOX WITH DIGITAL KEYBOARD EQUIPPED BY A PROGRAMMABLE MICROPROCESSOR FOR THE BEST REGULATION OF THE REQUIRED PARAMETERS AND THE SELECTION OF THE WRAPPING PROGRAMME AMONG :
* STANDARD WRAPPING CYCLE (WAY-UP AND DOWN)
* WAY-UP WRAPPING ONLY
* WAY-UP WRAPPING ONLY WITH FILM CARRIAGE STOP TO ALLOW THE POSITIONING OF A COVER SHEET ON THE TOP SIDE OF THE PALLET WITH ITS 4 SIDES COMPLETELY FREE FOR A WATERPROOF PROTECTION
* STANDARD WRAPPING CYCLE (WAY-UP AND DOWN) WITH FILM CARRIAGE STOP TO ALLOW THE POSITIONING OF A COVER SHEET ON THE TOP SIDE OF THE PALLET, WITH ITS 4 SIDES COMPLETELY FREE FOR A WATERPROOF PROTECTION
•FP35: ELECTROMECHANIC CONTROL BOX
•DIAGNOSTIC FOR THE AUTOMATIC DETECTION OF ANY DEFECT OR ALARM (ONLY FOR THE FP30-S VERSION)
•SELECTOR FOR MANUAL OR AUTOMATIC WORKING PROCEDURE
•SEPARATE TIMER FOR THE BOTTOM AND TOP WRAPS SETTING
•INVERTER CONTROLLING THE PROGRESSIVE START, THE REGULATION OF THE ROTATING SPEED AND THE INDEXED STOPPING POSITION OF THE TURNTABLE (STANDARD FOR THE FP35/S VERSION * OPTION CP260 FOR THE FP35 VERSION)
•ELECTROMAGNETIC CLUTCH FOR THE FILM TENSION CONTROL, ADJUSTABLE THROUGH A POTENTIOMETER
•FILM CARRIAGE WITH BELT TRANSMISSION
•COLUMN WITH HINGE FACILITY FOR A VERY EASY AND QUICK INSTALLATION
•LOWER SAFETY DEVICE MOUNTED BELOW THE FILM CARRIAGE
•FILM CARRIAGE MOTOR AND TURNTABLE MOTOR LOCATED INSIDE THE COLUMN
•MACHINE FRAME PREPARED TO BE EASILY LIFTED FROM THE COLUMN SIDE
•MACHINE PREPARED TO BE EQUIPPED WITH THE PNEUMATIC TOP PRESS
•STANDARD ELECTRIC SETTING : 380 V - 50 cycles - 3phase + neutral
•TOTAL WEIGHT OF THE MACHINE : 500 kg
•TURNTABLE ROTATING SPEED: 10 r.p.m. (FIXED) ON THE FP35 VERSION / ADJUSTABLE FROM 7 TO 15 r.p.m. ON THE FP35/S VERSION
•MAX. LOADING CAPACITY and MAX. PALLET DIMENSIONS : depending from the machine execution
•MAX. HEIGHT OF THE FILM ROLL : 500 mm
•MAX. DIAMETER OF THE FILM ROLL : 300 mm
•PHOTOCELL FOR THE AUTOMATIC PALLET HEIGHT DETECTION
•FP35/S: MAIN CONTROL BOX WITH DIGITAL KEYBOARD EQUIPPED BY A PROGRAMMABLE MICROPROCESSOR FOR THE BEST REGULATION OF THE REQUIRED PARAMETERS AND THE SELECTION OF THE WRAPPING PROGRAMME AMONG :
* STANDARD WRAPPING CYCLE (WAY-UP AND DOWN)
* WAY-UP WRAPPING ONLY
* WAY-UP WRAPPING ONLY WITH FILM CARRIAGE STOP TO ALLOW THE POSITIONING OF A COVER SHEET ON THE TOP SIDE OF THE PALLET WITH ITS 4 SIDES COMPLETELY FREE FOR A WATERPROOF PROTECTION
* STANDARD WRAPPING CYCLE (WAY-UP AND DOWN) WITH FILM CARRIAGE STOP TO ALLOW THE POSITIONING OF A COVER SHEET ON THE TOP SIDE OF THE PALLET, WITH ITS 4 SIDES COMPLETELY FREE FOR A WATERPROOF PROTECTION
•FP35: ELECTROMECHANIC CONTROL BOX
•DIAGNOSTIC FOR THE AUTOMATIC DETECTION OF ANY DEFECT OR ALARM (ONLY FOR THE FP30-S VERSION)
•SELECTOR FOR MANUAL OR AUTOMATIC WORKING PROCEDURE
•SEPARATE TIMER FOR THE BOTTOM AND TOP WRAPS SETTING
•INVERTER CONTROLLING THE PROGRESSIVE START, THE REGULATION OF THE ROTATING SPEED AND THE INDEXED STOPPING POSITION OF THE TURNTABLE (STANDARD FOR THE FP35/S VERSION * OPTION CP260 FOR THE FP35 VERSION)
•ELECTROMAGNETIC CLUTCH FOR THE FILM TENSION CONTROL, ADJUSTABLE THROUGH A POTENTIOMETER
•FILM CARRIAGE WITH BELT TRANSMISSION
•COLUMN WITH HINGE FACILITY FOR A VERY EASY AND QUICK INSTALLATION
•LOWER SAFETY DEVICE MOUNTED BELOW THE FILM CARRIAGE
•FILM CARRIAGE MOTOR AND TURNTABLE MOTOR LOCATED INSIDE THE COLUMN
•MACHINE FRAME PREPARED TO BE EASILY LIFTED FROM THE COLUMN SIDE
•MACHINE PREPARED TO BE EQUIPPED WITH THE PNEUMATIC TOP PRESS
•STANDARD ELECTRIC SETTING : 380 V - 50 cycles - 3phase + neutral
•TOTAL WEIGHT OF THE MACHINE : 500 kg
Category:Packaging Machinery
Seller:Bopak
company profile
Bopak
- Company introduction:БОПАК е компанија која е регионален лидер во областа на пакувањето. Основана е во 2000 година како фирма за производство, продажба и сервисирање на машини за пакување и продажба на амбалажа за пакување.
- Contact Person Name:Bopak
- Address:бул.К.Ј.Питу 24/13
- City:Skopje , Macedonia
- Cell Phone #:070 369 929
- Telephone #:022463011; 02 2464052
- Fax #:02 2463011
- Geo Location:Show
