SANTERNO Синус M
|
- product description
- company profile
product description
Product Description:
– Graphic LCD keypad featuring Multi-keypad function
– Smart Copier device enabling downloading/uploading the operating parameters and the firmware when the inverter is off
– Conduit Kit for cable routing, NEMA1 protection
– Flange Kit for the separation of the air flow for power section cooling.
– Communicator Kit for the conversion of the comms protocol: Modbus/Profibus DP, CANopen, Modbus TCP, Ethernet/IP
– Three-phase input/output inductors
– DC Input inductor
– Braking resistor
– Output ferrites
– Keypad remoting kit
– NEMA1 kit for the terminal board
– N.1 External relay with +24Vdc coil
– External comms kit with Modbus/Profibus DP protocol conversion board. Additional protocols available on demand: CANopen, CC-Link, Modbus/TCP, Profinet, Lonworks, etc.
– Additional EMC Filter featuring higher class than the integrated filter
– Three-phase input inductors
– DC Input inductors
– Three-phase output inductors (DU/DT filters), recommended for cable paths longer than 100m
– Braking resistor
– Output ferrites
Supply voltages and power range
Voltage class 2S Single-phase power supply 200 to 230Vac (-15%/+10%) 0.4 to 22kW
Voltage class 2T Three-phase power supply 200 to 230Vac (-15%/+10%) 0.4 to 22kW
Voltage class 4T Three-phase power supply 380 to 480Vac (-15%/+10%) 0.4 to 22kW
– Graphic LCD keypad featuring Multi-keypad function
– Smart Copier device enabling downloading/uploading the operating parameters and the firmware when the inverter is off
– Conduit Kit for cable routing, NEMA1 protection
– Flange Kit for the separation of the air flow for power section cooling.
– Communicator Kit for the conversion of the comms protocol: Modbus/Profibus DP, CANopen, Modbus TCP, Ethernet/IP
– Three-phase input/output inductors
– DC Input inductor
– Braking resistor
– Output ferrites
– Keypad remoting kit
– NEMA1 kit for the terminal board
– N.1 External relay with +24Vdc coil
– External comms kit with Modbus/Profibus DP protocol conversion board. Additional protocols available on demand: CANopen, CC-Link, Modbus/TCP, Profinet, Lonworks, etc.
– Additional EMC Filter featuring higher class than the integrated filter
– Three-phase input inductors
– DC Input inductors
– Three-phase output inductors (DU/DT filters), recommended for cable paths longer than 100m
– Braking resistor
– Output ferrites
Supply voltages and power range
Voltage class 2S Single-phase power supply 200 to 230Vac (-15%/+10%) 0.4 to 22kW
Voltage class 2T Three-phase power supply 200 to 230Vac (-15%/+10%) 0.4 to 22kW
Voltage class 4T Three-phase power supply 380 to 480Vac (-15%/+10%) 0.4 to 22kW
Category:EL Products , Other Electrical Equipment
Seller:Set еlektronik
company profile
Set еlektronik
- Company introduction:Set Elektronik postoi od 1994 god.Rabotime so rezervni delovi od oblasta na elektronikata, monta`a i proda`ba na mernoregulaciona oprema ,zastapni{tva na nekolku svetski renomirani firmi od ovaa oblast , in`enering,izveduvawe i monta`a na industriski ormari za kontrola i regulacija na procesno vodewe ,temperatura,pritisok. 1.Frekventni regulatori Prvenstveno sme orientirani na Frekventni i DC Regulatori, HMI TouchScreens i ostanatata cela programa od SSD-PARKER www.SSDdrives.uk ; , Solar Energy , Wind Energy ostanata cela programa od SANTERNO www.santerno.COM 2.Soft starteri SANTERNO i LED osvetluvawe so zasteda do 80% 3.Osigura~ka oprema Potoa vo na{ata programa ja imame i najgolemata firma za osigura~ka oprema FERRAZ za nizok ,sreden i visok napon koja {to pokriva 35% od svetskiot pazar za osigra~ka oprema www.ferrazshawmut.com 4.Elektromotori Santerno 5.PEPPERL+FUCHS Lokalen diler za Pepperl+Fuchs Mannheim Germany 6.PIXSYS designs and manufactures industrial automation systems, measure instruments and process controllers.
- Contact Person Name:Сет електроник
- Address:Добромир Хрс 51-б
- Post Code:1000
- City:Skopje , Macedonia
- Cell Phone #:070 245495
- Telephone #:02 2627527
- Fax #:02 2627527
- Geo Location:Show
