EQUIPMENT FOR SUBSTATIONS - Safety valve with weight MIP Cuprija
|
- product description
- company profile
product description
Description::Safety valve with weight is used as a security organ of pipeline for all running media non-aggressive character.
For temperatures up to 120 ° C to 16 bar pressure calibration max.
For temperatures up to 220 ° C 13 bar pressure calibration max.
Supplied calibrated with certificate accredited laboratories.
The construction of safety valves with weight
Housing safety valve with weight is a one-piece, made of high quality cast iron, with a recess length according to EN 558-1, Red first
The entrance opening is on the underside of its size DN determines nominal valve opening. Output port on the side. The cover is attached to the chassis with screws and therein lies the entire lever mechanism. The lid is made and axial bearing through which the water smooth spindle-driven shutter. Disc is made as a separate part, the connection with the spindle is safe and sound, but it provides little to adjust the position. Sealing surface safety valves with weight is derived fine surface treatment of the base metal seal that is made of hardened stainless steel with a minimum of 13% chromium.
Seat in the casing is made of stainless steel with a minimum of 13% chromium and safely and securely pressed into the base material of the case. The size of the passage opening through the seat casing is strictly controlled in order to be able to accurately determine the required size of the weight and pressure on the limited capacity of the relief.
For temperatures up to 120 ° C to 16 bar pressure calibration max.
For temperatures up to 220 ° C 13 bar pressure calibration max.
Supplied calibrated with certificate accredited laboratories.
The construction of safety valves with weight
Housing safety valve with weight is a one-piece, made of high quality cast iron, with a recess length according to EN 558-1, Red first
The entrance opening is on the underside of its size DN determines nominal valve opening. Output port on the side. The cover is attached to the chassis with screws and therein lies the entire lever mechanism. The lid is made and axial bearing through which the water smooth spindle-driven shutter. Disc is made as a separate part, the connection with the spindle is safe and sound, but it provides little to adjust the position. Sealing surface safety valves with weight is derived fine surface treatment of the base metal seal that is made of hardened stainless steel with a minimum of 13% chromium.
Seat in the casing is made of stainless steel with a minimum of 13% chromium and safely and securely pressed into the base material of the case. The size of the passage opening through the seat casing is strictly controlled in order to be able to accurately determine the required size of the weight and pressure on the limited capacity of the relief.
Availability:Contact
Company:Expont d.o.o
company profile
Expont d.o.o
- Company introduction:Expont d.o.o je trgovinsko preduzeće iz Beograda specijalizovano za promet opreme za grejanje i vodovod, osnovano 1992 godine. Nalazimo se u ulici Vojvode Stepe 153, na placu od 1100 m2, i halom od 250 m2. Pored maloprodaje u ulici Kumodraska 55 imamo još četiri maloprodaje. U sastavu privrednog društva Expont je proizvodno preduzeće Mip Livnica iz Ćuprije osnovano 1970. godine. Mip Livnica kao deo Exponta je jedini srpski proizvođač armature od sivog liva. Pored starog proizvodnog programa koji obuhvata odbojne klapne, hvatače nečistoće, kondenz lonce, usisne korpe i sl. sa 87 zaposlenih Mip danas lije i proizvodi ravno zaporne ventile, nepovratne ventile, leptir ventile, ventile sigurnosti sa tegom i oprugom, dvodelne loptaste slavine, prirubnice i ostalu prirubničku armaturu za podstanice. Preduzeće Expont preko svoje veleprodaje snabdeva trgovine, više od 700 izvođačkih firmi, od toplotne podstanice, primara i sekundara, preko cevnog razvoda pa sve do kućnih instalacija grejanja i vodovoda. Roba se isporučuje uz validan atest i garanciju, u šta su se uverile JKP Beogradske, Novosadske i ostale toplane, TE Kolubara, Kostolac i Obrenovac. Naš prioritet su mnogobrojni izvođači termo-tehničkih i vodovodnih instalacija , uz koje se preduzeće Expont razvilo, i napredovalo na srpskom tržištu. Za dugogodišnje saradnike kao i nove a korektne saradnike naše preduzeće je uvek spremno da u najkraćem roku, uz dobre cene kao i posebne rabatne skale dopremi opremu na gradilište.
- Contact Person Name:Goran Razumenić
- Address:Vojvode Stepe br. 153
- Post Code:11000
- city:Beograd , Serbia
- Cell Phone #:+381 60 641 68 32
- Telephone #:+381 11 398 20 22
- Fax #:www.expont.rs
- Geo Location:Show
