Valve radiator immersion GIACCOMINI
|
- product description
- company profile
product description
Description::GIACOMINI R440 immersion valve is designed for two-pipe heating systems and is an alternative to traditional valves that are placed on a heating element in combination with the valve. This valve allows you to really connect with the heating body at one point, combining aesthetically pleasing results and inexpensive solution especially in the reconstruction of buildings. A wide range of accessories that are available to connect to any heating appliance that can be found on the market.
characteristics
Immersion valve R440 allows you to connect the radiator pipes that can be run from the wall as from the floor. Valve in addition to manual regulation of flow and enables presetting and enables subsequent installation of thermostatic head which receives the ability to regulate temperature environment. Integrated pannel in the valve body also provides a means of balancing the complete closure rate as in the classical case the valve.
Specifications
Maximum operating temperature of 110 ° C
Maximum operating pressure of 1 MPa (10 bar)
Maximum differential pressure of 0.14 MPa (1.4 bar)
GIACOMINI R437 immersion valve is designed for one-pipe heating systems and is an alternative to traditional valves that are placed on a heating element in combination with the valve. This valve allows you to really connect with the heating body at one point, combining aesthetically pleasing results and inexpensive solution especially in the reconstruction of buildings. It has a thermostat option, or the option of placing Giacomini thermostatic heads.
characteristics
Valve to completely remove the radiator of central heating systems, which are made possible by the intervention of the heating body even when the system works. Completely closing the lever valve and the valve integrated working fluid central heating system passes through the by-pass valve to touching the next radiator.
Specifications
Maximum operating temperature: 110 ° C
Maximum operating pressure: 1 MPa (10 bar)
Maximum flow through the radiator 50% for manual valves, 35% for combined with Thermostatic head ΔT = 2K
characteristics
Immersion valve R440 allows you to connect the radiator pipes that can be run from the wall as from the floor. Valve in addition to manual regulation of flow and enables presetting and enables subsequent installation of thermostatic head which receives the ability to regulate temperature environment. Integrated pannel in the valve body also provides a means of balancing the complete closure rate as in the classical case the valve.
Specifications
Maximum operating temperature of 110 ° C
Maximum operating pressure of 1 MPa (10 bar)
Maximum differential pressure of 0.14 MPa (1.4 bar)
GIACOMINI R437 immersion valve is designed for one-pipe heating systems and is an alternative to traditional valves that are placed on a heating element in combination with the valve. This valve allows you to really connect with the heating body at one point, combining aesthetically pleasing results and inexpensive solution especially in the reconstruction of buildings. It has a thermostat option, or the option of placing Giacomini thermostatic heads.
characteristics
Valve to completely remove the radiator of central heating systems, which are made possible by the intervention of the heating body even when the system works. Completely closing the lever valve and the valve integrated working fluid central heating system passes through the by-pass valve to touching the next radiator.
Specifications
Maximum operating temperature: 110 ° C
Maximum operating pressure: 1 MPa (10 bar)
Maximum flow through the radiator 50% for manual valves, 35% for combined with Thermostatic head ΔT = 2K
Availability:Contact
Company:Expont d.o.o
company profile
Expont d.o.o
- Company introduction:Expont d.o.o je trgovinsko preduzeće iz Beograda specijalizovano za promet opreme za grejanje i vodovod, osnovano 1992 godine. Nalazimo se u ulici Vojvode Stepe 153, na placu od 1100 m2, i halom od 250 m2. Pored maloprodaje u ulici Kumodraska 55 imamo još četiri maloprodaje. U sastavu privrednog društva Expont je proizvodno preduzeće Mip Livnica iz Ćuprije osnovano 1970. godine. Mip Livnica kao deo Exponta je jedini srpski proizvođač armature od sivog liva. Pored starog proizvodnog programa koji obuhvata odbojne klapne, hvatače nečistoće, kondenz lonce, usisne korpe i sl. sa 87 zaposlenih Mip danas lije i proizvodi ravno zaporne ventile, nepovratne ventile, leptir ventile, ventile sigurnosti sa tegom i oprugom, dvodelne loptaste slavine, prirubnice i ostalu prirubničku armaturu za podstanice. Preduzeće Expont preko svoje veleprodaje snabdeva trgovine, više od 700 izvođačkih firmi, od toplotne podstanice, primara i sekundara, preko cevnog razvoda pa sve do kućnih instalacija grejanja i vodovoda. Roba se isporučuje uz validan atest i garanciju, u šta su se uverile JKP Beogradske, Novosadske i ostale toplane, TE Kolubara, Kostolac i Obrenovac. Naš prioritet su mnogobrojni izvođači termo-tehničkih i vodovodnih instalacija , uz koje se preduzeće Expont razvilo, i napredovalo na srpskom tržištu. Za dugogodišnje saradnike kao i nove a korektne saradnike naše preduzeće je uvek spremno da u najkraćem roku, uz dobre cene kao i posebne rabatne skale dopremi opremu na gradilište.
- Contact Person Name:Goran Razumenić
- Address:Vojvode Stepe br. 153
- Post Code:11000
- city:Beograd , Serbia
- Cell Phone #:+381 60 641 68 32
- Telephone #:+381 11 398 20 22
- Fax #:www.expont.rs
- Geo Location:Show