Heater soft CINI
|
- product description
- company profile
product description
Description::Device type MEK is intended for heating different systems, from small, such as a pipe registers or towel dryers to the radiators in the central heating systems. The Construction is resolved so that it can easily be incorporated into all types of pipe, cast iron, steel, aluminum and panel radiators.
The device is a soft type comprising:
• tubular heater special design
• electronic thermoregulator and thermal fuse, housed in a plastic casing 41 * 50mm
Technical Description
Device type MEK bases its work on "thermosiphon effect" whereby an electric heater 1 is the "thermodynamic pump". The radiator is at work acting as a single system, whose various parts (chains) are evenly "progrevaju" due to the circulation of water caused "thermosiphon effect."
2 button electronic thermoregulator enabled the fine regulation of temperature, and as a protection against possible overheating is incorporated thermal fuse, which is at an elevated temperature to melt and break the circuit power heater.
Illumination of the warning light 3 (installed inside the heater) indicates the heater.
MEK device is designed so that it can be easily installed without professional assistance, and detailed installation instructions enclosed with each device.
Made of the highest quality, certified materials and components to guarantee smooth functioning.
Benefits MEK heaters
The advantage of the device MEK over other alternative heat sources:
there is no danger of fire (carpet, curtains, etc..)
there is no risk of skin bare heating wires, metal objects (children of wire or a nail)
does not take up extra space in your apartment
possibility of fine control of intensity heating maintenance of minimum temperature (as Protection against freezing)
in a space that is used periodically (cottages) Can be used for heating a room (one unit - one radiator) or to connect multiple devices in a system for heating the whole house
price of the device is lower than for any other source of heat.
The device is a soft type comprising:
• tubular heater special design
• electronic thermoregulator and thermal fuse, housed in a plastic casing 41 * 50mm
Technical Description
Device type MEK bases its work on "thermosiphon effect" whereby an electric heater 1 is the "thermodynamic pump". The radiator is at work acting as a single system, whose various parts (chains) are evenly "progrevaju" due to the circulation of water caused "thermosiphon effect."
2 button electronic thermoregulator enabled the fine regulation of temperature, and as a protection against possible overheating is incorporated thermal fuse, which is at an elevated temperature to melt and break the circuit power heater.
Illumination of the warning light 3 (installed inside the heater) indicates the heater.
MEK device is designed so that it can be easily installed without professional assistance, and detailed installation instructions enclosed with each device.
Made of the highest quality, certified materials and components to guarantee smooth functioning.
Benefits MEK heaters
The advantage of the device MEK over other alternative heat sources:
there is no danger of fire (carpet, curtains, etc..)
there is no risk of skin bare heating wires, metal objects (children of wire or a nail)
does not take up extra space in your apartment
possibility of fine control of intensity heating maintenance of minimum temperature (as Protection against freezing)
in a space that is used periodically (cottages) Can be used for heating a room (one unit - one radiator) or to connect multiple devices in a system for heating the whole house
price of the device is lower than for any other source of heat.
Availability:Contact
Company:Expont d.o.o
company profile
Expont d.o.o
- Company introduction:Expont d.o.o je trgovinsko preduzeće iz Beograda specijalizovano za promet opreme za grejanje i vodovod, osnovano 1992 godine. Nalazimo se u ulici Vojvode Stepe 153, na placu od 1100 m2, i halom od 250 m2. Pored maloprodaje u ulici Kumodraska 55 imamo još četiri maloprodaje. U sastavu privrednog društva Expont je proizvodno preduzeće Mip Livnica iz Ćuprije osnovano 1970. godine. Mip Livnica kao deo Exponta je jedini srpski proizvođač armature od sivog liva. Pored starog proizvodnog programa koji obuhvata odbojne klapne, hvatače nečistoće, kondenz lonce, usisne korpe i sl. sa 87 zaposlenih Mip danas lije i proizvodi ravno zaporne ventile, nepovratne ventile, leptir ventile, ventile sigurnosti sa tegom i oprugom, dvodelne loptaste slavine, prirubnice i ostalu prirubničku armaturu za podstanice. Preduzeće Expont preko svoje veleprodaje snabdeva trgovine, više od 700 izvođačkih firmi, od toplotne podstanice, primara i sekundara, preko cevnog razvoda pa sve do kućnih instalacija grejanja i vodovoda. Roba se isporučuje uz validan atest i garanciju, u šta su se uverile JKP Beogradske, Novosadske i ostale toplane, TE Kolubara, Kostolac i Obrenovac. Naš prioritet su mnogobrojni izvođači termo-tehničkih i vodovodnih instalacija , uz koje se preduzeće Expont razvilo, i napredovalo na srpskom tržištu. Za dugogodišnje saradnike kao i nove a korektne saradnike naše preduzeće je uvek spremno da u najkraćem roku, uz dobre cene kao i posebne rabatne skale dopremi opremu na gradilište.
- Contact Person Name:Goran Razumenić
- Address:Vojvode Stepe br. 153
- Post Code:11000
- city:Beograd , Serbia
- Cell Phone #:+381 60 641 68 32
- Telephone #:+381 11 398 20 22
- Fax #:www.expont.rs
- Geo Location:Show
