EQUIPMENT FOR SUBSTATIONS - Control valve with gauge valves HERZ STROMAX
|
- product description
- company profile
product description
Description::Design of the control valves with gauge valves HERZ
Control valve branch with measuring valves DN 25 - 80
Straight headquarters, housing cast iron GJL 250 according to EN 1561, flanges per EN 1092, PN 16; painted blue.
Upper part of brass valves, no vertical valve lift, double seal spindle using the O-ring.
Pre-setting limitation of valve lift, digital indicating the degree of pre-setting the window handwheel. Two metering valves are mounted next to the handwheel. Four holes 3/8 (DN10) for the drain cock closed with locking caps.
Metering valves
Two metering valves are mounted in the same direction in addition to the hand wheel and factory sealed.
This arrangement guarantees in all installation positions the best availability and the optimal connection of the measuring device.
Structural characteristics of the control valve with gauge valves HERZ
The direction of flow should match arrow on the valve body.
It's directly to the axis of the valve, with no vertical displacement valve stem, guarantee with every installation position optimum accessibility and operation of the valve.
Sealing of the spindle is carried by the elastic double O-ring is provided thereby permanently sealing and easy.
Double sealing O-ring does not need to maintain, guarantee a lasting and positive sealing valve spindle and easy access during operation of the valve.
Permanently elastic and resistant to temperature, soft seal does not korozira allows minimal force closure
Control valve branch with measuring valves DN 25 - 80
Straight headquarters, housing cast iron GJL 250 according to EN 1561, flanges per EN 1092, PN 16; painted blue.
Upper part of brass valves, no vertical valve lift, double seal spindle using the O-ring.
Pre-setting limitation of valve lift, digital indicating the degree of pre-setting the window handwheel. Two metering valves are mounted next to the handwheel. Four holes 3/8 (DN10) for the drain cock closed with locking caps.
Metering valves
Two metering valves are mounted in the same direction in addition to the hand wheel and factory sealed.
This arrangement guarantees in all installation positions the best availability and the optimal connection of the measuring device.
Structural characteristics of the control valve with gauge valves HERZ
The direction of flow should match arrow on the valve body.
It's directly to the axis of the valve, with no vertical displacement valve stem, guarantee with every installation position optimum accessibility and operation of the valve.
Sealing of the spindle is carried by the elastic double O-ring is provided thereby permanently sealing and easy.
Double sealing O-ring does not need to maintain, guarantee a lasting and positive sealing valve spindle and easy access during operation of the valve.
Permanently elastic and resistant to temperature, soft seal does not korozira allows minimal force closure
Availability:Contact
Company:Expont d.o.o
company profile
Expont d.o.o
- Company introduction:Expont d.o.o je trgovinsko preduzeće iz Beograda specijalizovano za promet opreme za grejanje i vodovod, osnovano 1992 godine. Nalazimo se u ulici Vojvode Stepe 153, na placu od 1100 m2, i halom od 250 m2. Pored maloprodaje u ulici Kumodraska 55 imamo još četiri maloprodaje. U sastavu privrednog društva Expont je proizvodno preduzeće Mip Livnica iz Ćuprije osnovano 1970. godine. Mip Livnica kao deo Exponta je jedini srpski proizvođač armature od sivog liva. Pored starog proizvodnog programa koji obuhvata odbojne klapne, hvatače nečistoće, kondenz lonce, usisne korpe i sl. sa 87 zaposlenih Mip danas lije i proizvodi ravno zaporne ventile, nepovratne ventile, leptir ventile, ventile sigurnosti sa tegom i oprugom, dvodelne loptaste slavine, prirubnice i ostalu prirubničku armaturu za podstanice. Preduzeće Expont preko svoje veleprodaje snabdeva trgovine, više od 700 izvođačkih firmi, od toplotne podstanice, primara i sekundara, preko cevnog razvoda pa sve do kućnih instalacija grejanja i vodovoda. Roba se isporučuje uz validan atest i garanciju, u šta su se uverile JKP Beogradske, Novosadske i ostale toplane, TE Kolubara, Kostolac i Obrenovac. Naš prioritet su mnogobrojni izvođači termo-tehničkih i vodovodnih instalacija , uz koje se preduzeće Expont razvilo, i napredovalo na srpskom tržištu. Za dugogodišnje saradnike kao i nove a korektne saradnike naše preduzeće je uvek spremno da u najkraćem roku, uz dobre cene kao i posebne rabatne skale dopremi opremu na gradilište.
- Contact Person Name:Goran Razumenić
- Address:Vojvode Stepe br. 153
- Post Code:11000
- city:Beograd , Serbia
- Cell Phone #:+381 60 641 68 32
- Telephone #:+381 11 398 20 22
- Fax #:www.expont.rs
- Geo Location:Show
