Boiler to liquid and / or gaseous fuel EKO-CUP M3
|
- product description
- company profile
product description
Description::Steel heating boilers EKO -CUP nominal capacity of 18-80 kW contemporary design and distinguished by high efficiency and low emission combustion products . They are intended for combustion of oil or gas to the burner properly .
Three-pass flue gases is an essential prerequisite that makes this boiler sparingly. The high degree of utilization of 93.8 % . Reduced NOx content
Built turbulators provide better heat transfer from the flue gas to the boiler water , regulation of resistance furnaces , control the output temperature of flue gases , and quality adjustment of the boiler - burner - flue .
Large front doors can be opened to the left or right side for easy cleaning and maintenance .
High water content in boiler reduces switching and extends the life of the burner while saving energy .
Been prepared in accordance with EN303 -1 and ISO9001/2000 .
Factory boiler wiring done with basic boiler control and prepared the mounting regulations that govern the many rounds of heating water outside temperature .
Delivered particular boiler body , especially sheeting with thermal insulation and a front cover for the sound insulation of the burner .
Model with built- chromium accumulation boiler ( 80 liters) of built-in above the boiler carries the EKO -CUP M3 Bg while there is a model with externally added water heater is provided for installation under the boiler
The boiler is supplied separately from the insulation and boiler casing . The cost of the boiler is the main boiler control .
Three-pass flue gases is an essential prerequisite that makes this boiler sparingly. The high degree of utilization of 93.8 % . Reduced NOx content
Built turbulators provide better heat transfer from the flue gas to the boiler water , regulation of resistance furnaces , control the output temperature of flue gases , and quality adjustment of the boiler - burner - flue .
Large front doors can be opened to the left or right side for easy cleaning and maintenance .
High water content in boiler reduces switching and extends the life of the burner while saving energy .
Been prepared in accordance with EN303 -1 and ISO9001/2000 .
Factory boiler wiring done with basic boiler control and prepared the mounting regulations that govern the many rounds of heating water outside temperature .
Delivered particular boiler body , especially sheeting with thermal insulation and a front cover for the sound insulation of the burner .
Model with built- chromium accumulation boiler ( 80 liters) of built-in above the boiler carries the EKO -CUP M3 Bg while there is a model with externally added water heater is provided for installation under the boiler
The boiler is supplied separately from the insulation and boiler casing . The cost of the boiler is the main boiler control .
Availability:Contact
Company:Etaž d.o.o.
company profile
Etaž d.o.o.
- Company introduction:Etaž d.o.o. is a private trading company established in Belgrade in 1990. Predominant activity of the company is trading with equipment for central heating. Work commencement is based on retailing of home thermo-technical and gas installations. Today, in addition to nine specialized retail stores in Belgrade, Pančevo, Mladenovac, Smederevo and Niš and several commission retail stores in Serbia, ETAŽ uses wholesales to supply contractors and investors of large facilities with materials for central heating, including substations, pipe distribution and very wide assortment of home installations, in terms of more than 5200 products. ETAŽ is present on the market of Montenegro through company Mikro-mont - Bijelo Polje. ETAŽ is an agent/importer of products manufactured by renowned European manufacturers in the field of thermo-technical installations: Armack, Aquamax, Caleffi, Centrometal, Danfoss, ESBE, FAF, Fondital, Giersch, Henco, Herz, Junkers, Rems, Rehau and Sitem. Fitters of SPLIT cooling systems are supported with all accompanying equipment for air-conditioning systems (copper pipes, insulation, air-conditioning unit supporter, condense hoses). n accordance with balance and loss statement for 2006, ETAŽ is categorized as a medium-sized company with currently 114 employees, whereof 25 has university-level education and others with high-school education. We assist prospective buyers in material selection and recommend quality designers and contractors. We deliver purchased merchandise to the buyers, as agreed.. Call on one of provided telephone numbers and verify our business conduct and preparedness to respond your requests promptly and quality.
- Contact Person Name:Vladimir Cvijović
- Address:Šumatovačka 2
- Post Code:11224
- city:Vrčin , Serbia
- Telephone #:+381 11 805 3980
- Geo Location:Show
