8-channel hot runner thermo controller HR8
|
- product description
- company profile
product description
Description:HR8 is 8-channel microprocessor thermo controller, designed for managing heating of matrix nozzles and channels via hot runner system. The device has the following characteristics :
◦Flexible and convenient user interface.
The device shows on a large illuminated LED display the temperature of each of the 8 zones of the mould. The same indicators at the push of a button may appear: the assignment of the zone, instantaneous power and the difference between the temperature and reference. To configure the parameters of the controller, the user has a comfortable 4x20 LCD display ◦High security of product.
Device has a built-in contactor, which secure dividing power from heaters, even in case of shorted triac. Each zone has a separate fast-burning fuse (type FF), which protects both the mould and device while shorted heater. ◦Continuous diagnostics.
The controller monitors the temperature of each zone of the matrix and recognizes the following emergency situations: interrupted heater, triac uncontrolled, lack of thermocouple. The occurrence of such an emergency situation can lead to the exclusion of all heating zones or only be indicated by a red LED of the zone. ◦Ability to automatically attach of a zone.
This allows during operation, in case of a failure of a thermocouple, the controller automatically to starts to control that zone as any other like to it zone. In this way avoids costly stop of the syringe for the repair and replacement of the thermocouple of the zone. ◦Possibility of "soft start".
It allows heaters to dry during the initial start of the matrix in order to avoid short-circuit in case of condensation into the heater. ◦Modes "BOOST" and "STAND BY".
By pressing one button all references for temperature of the zones can be increased / decreased. Mode "BOOST" (increase) is necessary for the initial start of the mold - short-term increase in temperature in order to unclog nozzles. Mode "STAND BY" is used when a pause in the syringe for energy savings. Multichannel microprocessor controllers series HR8 are suitable for use primarily for matrices with4-6 nozzles and 2-4 zones in a warm cannels. They also can be used for matrices with a large mass of a manufactured part, because each of the zones can be equipped with a heater for 3,3kW. The controllers can be used also in combination with HR16 and HR24 to manage the zones of warm channel system in the moulds with 16, 24 or more nozzles.
◦Flexible and convenient user interface.
The device shows on a large illuminated LED display the temperature of each of the 8 zones of the mould. The same indicators at the push of a button may appear: the assignment of the zone, instantaneous power and the difference between the temperature and reference. To configure the parameters of the controller, the user has a comfortable 4x20 LCD display ◦High security of product.
Device has a built-in contactor, which secure dividing power from heaters, even in case of shorted triac. Each zone has a separate fast-burning fuse (type FF), which protects both the mould and device while shorted heater. ◦Continuous diagnostics.
The controller monitors the temperature of each zone of the matrix and recognizes the following emergency situations: interrupted heater, triac uncontrolled, lack of thermocouple. The occurrence of such an emergency situation can lead to the exclusion of all heating zones or only be indicated by a red LED of the zone. ◦Ability to automatically attach of a zone.
This allows during operation, in case of a failure of a thermocouple, the controller automatically to starts to control that zone as any other like to it zone. In this way avoids costly stop of the syringe for the repair and replacement of the thermocouple of the zone. ◦Possibility of "soft start".
It allows heaters to dry during the initial start of the matrix in order to avoid short-circuit in case of condensation into the heater. ◦Modes "BOOST" and "STAND BY".
By pressing one button all references for temperature of the zones can be increased / decreased. Mode "BOOST" (increase) is necessary for the initial start of the mold - short-term increase in temperature in order to unclog nozzles. Mode "STAND BY" is used when a pause in the syringe for energy savings. Multichannel microprocessor controllers series HR8 are suitable for use primarily for matrices with4-6 nozzles and 2-4 zones in a warm cannels. They also can be used for matrices with a large mass of a manufactured part, because each of the zones can be equipped with a heater for 3,3kW. The controllers can be used also in combination with HR16 and HR24 to manage the zones of warm channel system in the moulds with 16, 24 or more nozzles.
Seller:Ring Engineering Ltd.
Place of Origin:Bulgaria
Warranty:2 years
company profile
Ring Engineering Ltd.
- Company introduction:We are manufacturers of hot-runner temperature controllers for injection moulds, general purpose temperature controllers, programmable controllers, dispenser- mixers, amplifiers for proportional valves etc. Our products are used in plastic industry, bakery, confectionery industry, automation and more.
- Contact Person Name:Rumen Dimov
- Address:ul. Tsarevo 10
- Post Code:4000
- City:Plovdiv , Bulgaria
- Cell Phone #:0878 695211
- Telephone #:+359 32 622 146
- Fax #:+359 32 622 146
| Price VAT Included:Ask for price 16- channel hot runner thermo contr ...
| Price VAT Included:Ask for price 24- channel hot runner thermo contr ...
| Price VAT Included:Ask for price 4 - channel thermo controller for m ...
|
