Машина за палетизирање FP35/T - FP35/S-T
|
- опис на производот
- профил на компанијата
опис на производот
Опис на производот:•TURNTABLE DIAMETER : 1500/1800 mm
•TURNTABLE ROTATING SPEED : ADJUSTABLE FROM 7 TO 15 r.p.m.
•MAX. LOAD CAPACITY and MAX. PALLET DIMENSIONS : depending from the machine execution
•MAX. HEIGHT OF THE FILM ROLL : 500 mm
•MAX. DIAMETER OF THE FILM ROLL : 300 mm
•PHOTOCELL FOR THE AUTOMATIC PALLET HEIGHT DETECTION
•FP35/S-T: MAIN CONTROL BOX WITH DIGITAL KEYBOARD EQUIPPED BY A PROGRAMMABLE MICROPROCESSOR FOR THE BEST REGULATION OF THE REQUIRED PARAMETERS AND THE SELECTION OF THE WRAPPING PROGRAMME AMONG :
* STANDARD WRAPPING CYCLE (WAY-UP AND DOWN)
* WAY-UP WRAPPING ONLY
* WAY-UP WRAPPING ONLY WITH FILM CARRIAGE STOP TO ALLOW THE POSITIONING OF A COVER SHEET ON THE TOP SIDE OF THE PALLET WITH ITS 4 SIDES COMPLETELY FREE FOR A WATERPROOF PROTECTION
* STANDARD WRAPPING CYCLE (WAY-UP AND DOWN) WITH FILM CARRIAGE STOP TO ALLOW THE POSITIONING OF A COVER SHEET ON THE TOP SIDE OF THE PALLET, WITH ITS 4 SIDES COMPLETELY FREE FOR A WATERPROOF PROTECTION
•FP35/T: ELECTROMECHANIC CONTROL BOX
•DIAGNOSTIC FOR THE AUTOMATIC DETECTION OF ANY DEFECT OR ALARM (ONLY FOR THE FP35/S-T VERSION)
•SELECTOR FOR MANUAL OR AUTOMATIC WORKING PROCEDURE
•SEPARATE TIMER FOR THE BOTTOM AND TOP WRAPS SETTING
•INVERTER CONTROLLING THE PROGRESSIVE START, THE REGULATION OF THE ROTATING SPEED AND THE INDEXED STOPPING POSITION OF THE TURNTABLE
•ELECTROMAGNETIC CLUTCH FOR THE FILM TENSION CONTROL, ADJUSTABLE THROUGH A POTENTIOMETER
•FILM CARRIAGE WITH BELT TRANSMISSION
•COLUMN WITH HINGE FACILITY FOR A VERY EASY AND QUICK INSTALLATION
LOWER SAFETY DEVICE MOUNTED BELOW THE FILM CARRIAGE
FILM CARRIAGE MOTOR LOCATED INSIDE THE COLUMN
•TURNTABLE MOTOR COVER
•SAFETY ARMS WITH PHOTOCELL (FILMA PATENT NO. MI96UOOO255) TO PREVENT ANY ACCIDENT DUE TO THE UN-EXPECTED ENTRY OF THE JACKPALLET INSIDE THE THE TURN-TABLE AREA DURING THE NORMAL WORKING CYCLE
•MACHINE PREPARED TO BE EQUIPPED WITH THE PNEUMATIC TOP PRESS
•STANDARD ELECTRIC SETTING : 380 V - 50 cycles - 3phase + neutral
•TOTAL WEIGHT OF THE MACHINE : 550 kg
•TURNTABLE ROTATING SPEED : ADJUSTABLE FROM 7 TO 15 r.p.m.
•MAX. LOAD CAPACITY and MAX. PALLET DIMENSIONS : depending from the machine execution
•MAX. HEIGHT OF THE FILM ROLL : 500 mm
•MAX. DIAMETER OF THE FILM ROLL : 300 mm
•PHOTOCELL FOR THE AUTOMATIC PALLET HEIGHT DETECTION
•FP35/S-T: MAIN CONTROL BOX WITH DIGITAL KEYBOARD EQUIPPED BY A PROGRAMMABLE MICROPROCESSOR FOR THE BEST REGULATION OF THE REQUIRED PARAMETERS AND THE SELECTION OF THE WRAPPING PROGRAMME AMONG :
* STANDARD WRAPPING CYCLE (WAY-UP AND DOWN)
* WAY-UP WRAPPING ONLY
* WAY-UP WRAPPING ONLY WITH FILM CARRIAGE STOP TO ALLOW THE POSITIONING OF A COVER SHEET ON THE TOP SIDE OF THE PALLET WITH ITS 4 SIDES COMPLETELY FREE FOR A WATERPROOF PROTECTION
* STANDARD WRAPPING CYCLE (WAY-UP AND DOWN) WITH FILM CARRIAGE STOP TO ALLOW THE POSITIONING OF A COVER SHEET ON THE TOP SIDE OF THE PALLET, WITH ITS 4 SIDES COMPLETELY FREE FOR A WATERPROOF PROTECTION
•FP35/T: ELECTROMECHANIC CONTROL BOX
•DIAGNOSTIC FOR THE AUTOMATIC DETECTION OF ANY DEFECT OR ALARM (ONLY FOR THE FP35/S-T VERSION)
•SELECTOR FOR MANUAL OR AUTOMATIC WORKING PROCEDURE
•SEPARATE TIMER FOR THE BOTTOM AND TOP WRAPS SETTING
•INVERTER CONTROLLING THE PROGRESSIVE START, THE REGULATION OF THE ROTATING SPEED AND THE INDEXED STOPPING POSITION OF THE TURNTABLE
•ELECTROMAGNETIC CLUTCH FOR THE FILM TENSION CONTROL, ADJUSTABLE THROUGH A POTENTIOMETER
•FILM CARRIAGE WITH BELT TRANSMISSION
•COLUMN WITH HINGE FACILITY FOR A VERY EASY AND QUICK INSTALLATION
LOWER SAFETY DEVICE MOUNTED BELOW THE FILM CARRIAGE
FILM CARRIAGE MOTOR LOCATED INSIDE THE COLUMN
•TURNTABLE MOTOR COVER
•SAFETY ARMS WITH PHOTOCELL (FILMA PATENT NO. MI96UOOO255) TO PREVENT ANY ACCIDENT DUE TO THE UN-EXPECTED ENTRY OF THE JACKPALLET INSIDE THE THE TURN-TABLE AREA DURING THE NORMAL WORKING CYCLE
•MACHINE PREPARED TO BE EQUIPPED WITH THE PNEUMATIC TOP PRESS
•STANDARD ELECTRIC SETTING : 380 V - 50 cycles - 3phase + neutral
•TOTAL WEIGHT OF THE MACHINE : 550 kg
Категорија:Механизација за пакување
Продавач:Бопак
профил на компанијата
Бопак
- Опис на компанијата:БОПАК е компанија која е регионален лидер во областа на пакувањето. Основана е во 2000 година како фирма за производство, продажба и сервисирање на машини за пакување и продажба на амбалажа за пакување.
- Име на контакт лице:Bopak
- Адреса:бул.К.Ј.Питу 24/13
- Град:Скопје , Македонија
- Мобилен #:070 369 929
- Телефон #:022463011; 02 2464052
- Факс #:02 2463011
- Локација на мапа:Прикажи
