Машина за палетизирање FP/EASY
|
- опис на производот
- профил на компанијата
опис на производот
Опис на производот:•NO. 2 UNITS OF 12 VOLT GEL TRACTION BATTERIES WITHOUT MAINTENANCE
•INCORPORATED BATTERIES LOADER
•MAX. PALLET/LOAD LENGTH AND WIDTH : without limitation
•MAX. PALLET/LOAD HEIGHT : depending from the machine execution
•MAX. HEIGHT OF THE FILM ROLL : 500 mm
•MAX. DIAMETER OF THE FILM ROLL : 300 mm
•NUMBER OF WRAPPING CYCLES BEFORE RECHARGING THE BATTERIES : 250/300 approximately, depending from the product/load dimensions and from the specifications of the working cycle
•FILM CARRIAGE WITH BELT TRANSMISSION
•PHOTOCELL FOR THE AUTOMATIC PALLET HEIGHT DETECTION
•ELECTROMAGNETIC CLUTCH FOR THE FILM TENSION CONTROL, ADJUSTABLE THROUGH A POTENTIOMETER
•MAIN CONTROL BOX WITH DIGITAL KEYBOARD EQUIPPED BY A PROGRAMMABLE MICROPROCESSOR FOR THE BEST REGULATION OF THE REQUIRED PARAMETERS AND THE SELECTION OF THE WRAPPING PROGRAMME AMONG : * STANDARD WRAPPING CYCLE (WAY-UP AND DOWN) * WAY-UP WRAPPING ONLY * WAY-UP WRAPPING ONLY WITH FILM CARRIAGE STOP TO ALLOW THE POSITIONING OF A COVER SHEET ON THE TOP SIDE OF THE PALLET WITH ITS 4 SIDES COMPLETELY FREE FOR A WATERPROOF PROTECTION * STANDARD WRAPPING CYCLE (WAY-UP AND DOWN) WITH FILM CARRIAGE STOP TO ALLOW THE POSITIONING OF A COVER SHEET ON THE TOP SIDE OF THE PALLET, WITH ITS 4 SIDES COMPLETELY FREE FOR A WATERPROOF PROTECTION
•DIAGNOSTIC FOR THE AUTOMATIC DETECTION OF ANY DEFECT OR ALARM
•SELECTOR FOR MANUAL OR AUTOMATIC WORKING PROCEDURE
•SEPARATE TIMER FOR THE BOTTOM AND TOP WRAPS SETTING
•INVERTER CONTROLLING THE PROGRESSIVE START AND THE REGULATION OF THE ROTATING SPEED
•ADJUSTABLE FILM CARRIAGE MOVING SPEED, CONTROLLED THROUGH AN INVERTER
•DRIVING-HOUSE WITH MANUAL CONTROL FOR FORWARD / BACKWARD MOVEMENT
•FRONT SAFETY UNIT FOR THE EMERGENCY STOP OF THE MACHINE WORKING
•BATTERY LEVEL INDICATOR
•POSSIBILITY TO TRANSPORT THE MACHINE WITHOUT HAVING TO DISMOUNT THE BATTERIES
•THE GEL BATTERIES ALLOW THE POSSIBILITY TO USE THE MACHINE IN PARTICULAR WORKING PLACES (UNLESS SPECIFIC RESTRICTIONS/REGULATIONS)
•MOTORS IN IP54 PROTECTION
•STANDARD ELECTRIC SUPPLY : 220 v – single phase
•TOTAL WEIGHT OF THE MACHINE : 350 kg
•INCORPORATED BATTERIES LOADER
•MAX. PALLET/LOAD LENGTH AND WIDTH : without limitation
•MAX. PALLET/LOAD HEIGHT : depending from the machine execution
•MAX. HEIGHT OF THE FILM ROLL : 500 mm
•MAX. DIAMETER OF THE FILM ROLL : 300 mm
•NUMBER OF WRAPPING CYCLES BEFORE RECHARGING THE BATTERIES : 250/300 approximately, depending from the product/load dimensions and from the specifications of the working cycle
•FILM CARRIAGE WITH BELT TRANSMISSION
•PHOTOCELL FOR THE AUTOMATIC PALLET HEIGHT DETECTION
•ELECTROMAGNETIC CLUTCH FOR THE FILM TENSION CONTROL, ADJUSTABLE THROUGH A POTENTIOMETER
•MAIN CONTROL BOX WITH DIGITAL KEYBOARD EQUIPPED BY A PROGRAMMABLE MICROPROCESSOR FOR THE BEST REGULATION OF THE REQUIRED PARAMETERS AND THE SELECTION OF THE WRAPPING PROGRAMME AMONG : * STANDARD WRAPPING CYCLE (WAY-UP AND DOWN) * WAY-UP WRAPPING ONLY * WAY-UP WRAPPING ONLY WITH FILM CARRIAGE STOP TO ALLOW THE POSITIONING OF A COVER SHEET ON THE TOP SIDE OF THE PALLET WITH ITS 4 SIDES COMPLETELY FREE FOR A WATERPROOF PROTECTION * STANDARD WRAPPING CYCLE (WAY-UP AND DOWN) WITH FILM CARRIAGE STOP TO ALLOW THE POSITIONING OF A COVER SHEET ON THE TOP SIDE OF THE PALLET, WITH ITS 4 SIDES COMPLETELY FREE FOR A WATERPROOF PROTECTION
•DIAGNOSTIC FOR THE AUTOMATIC DETECTION OF ANY DEFECT OR ALARM
•SELECTOR FOR MANUAL OR AUTOMATIC WORKING PROCEDURE
•SEPARATE TIMER FOR THE BOTTOM AND TOP WRAPS SETTING
•INVERTER CONTROLLING THE PROGRESSIVE START AND THE REGULATION OF THE ROTATING SPEED
•ADJUSTABLE FILM CARRIAGE MOVING SPEED, CONTROLLED THROUGH AN INVERTER
•DRIVING-HOUSE WITH MANUAL CONTROL FOR FORWARD / BACKWARD MOVEMENT
•FRONT SAFETY UNIT FOR THE EMERGENCY STOP OF THE MACHINE WORKING
•BATTERY LEVEL INDICATOR
•POSSIBILITY TO TRANSPORT THE MACHINE WITHOUT HAVING TO DISMOUNT THE BATTERIES
•THE GEL BATTERIES ALLOW THE POSSIBILITY TO USE THE MACHINE IN PARTICULAR WORKING PLACES (UNLESS SPECIFIC RESTRICTIONS/REGULATIONS)
•MOTORS IN IP54 PROTECTION
•STANDARD ELECTRIC SUPPLY : 220 v – single phase
•TOTAL WEIGHT OF THE MACHINE : 350 kg
Категорија:Механизација за пакување
Продавач:Бопак
профил на компанијата
Бопак
- Опис на компанијата:БОПАК е компанија која е регионален лидер во областа на пакувањето. Основана е во 2000 година како фирма за производство, продажба и сервисирање на машини за пакување и продажба на амбалажа за пакување.
- Име на контакт лице:Bopak
- Адреса:бул.К.Ј.Питу 24/13
- Град:Скопје , Македонија
- Мобилен #:070 369 929
- Телефон #:022463011; 02 2464052
- Факс #:02 2463011
- Локација на мапа:Прикажи
