Pad laminate
|
- product description
- company profile
product description
Description:Pad laminate
There are several basic types of substrates used in the installation of laminate flooring. The most common are polyethylene pads and their main advantage is the low price. Their main disadvantages are their low noise and thermal properties, and that are easily crushed under the weight of the flooring and furniture on them.
Fibranovite pads are denser structure and thereby have significantly better performance. They are both very good thermal and noise insulator and much more resistant to deformation under pressure and long use. It is also available in versions with greater thickness, which could be very handy for lifting the floor or need to level the bigger bumps.
Coconut mat is made from natural materials with wood and has similar properties as fibranovite pads. Available in thickness of only 5 mm.
Polyethylene liner
Required under the laminate flooring is placed at least 2 mm substrate. In light of the uneven floor we recommend using 3 mm or 5 mm.
Fibranova pad
Fibranovata pad has very good thermal and sound insulation properties. Used for uneven surfaces, and thanks to its elasticity takes small bumps on the floor. Using it can increase the level of the floor if necessary. Available in sheet sizes 60sm/125sm.
Coconut Mat
Made of natural materials and is extremely high sound and thermal insulation properties.
Instructions for mounting pad (fibranova or coconut)
The base must be prepared prior to application of the overlay. It should be flat, dry and free of rocks and debris with a vacuum cleaner.
In newbuilt screeds should wait until complete drying, so as not to damage the surface. Humidity should not exceed 3%
If necessary, it can be made and paronepropusklivo foil 2 mm, it should be applied with an overlap of about 20 cm foil to the wall and stand about 2 cm
Insulation boards must be laid in rows, leaving a distance of 2 mm between them. It is necessary to leave gaps temperature of about 10 mm to walls, ceilings, columns and more.
Insulation boards to be placed in the direction of the flooring. Should be avoided matching the seams of the pad and the floor.
You should not step on the pad to prevent surface damage her
Advantages of laminate flooring factory pad Selencio
When the pad is glued vibrations are reduced significantly
Resembles walking on parquet
There are several basic types of substrates used in the installation of laminate flooring. The most common are polyethylene pads and their main advantage is the low price. Their main disadvantages are their low noise and thermal properties, and that are easily crushed under the weight of the flooring and furniture on them.
Fibranovite pads are denser structure and thereby have significantly better performance. They are both very good thermal and noise insulator and much more resistant to deformation under pressure and long use. It is also available in versions with greater thickness, which could be very handy for lifting the floor or need to level the bigger bumps.
Coconut mat is made from natural materials with wood and has similar properties as fibranovite pads. Available in thickness of only 5 mm.
Polyethylene liner
Required under the laminate flooring is placed at least 2 mm substrate. In light of the uneven floor we recommend using 3 mm or 5 mm.
Fibranova pad
Fibranovata pad has very good thermal and sound insulation properties. Used for uneven surfaces, and thanks to its elasticity takes small bumps on the floor. Using it can increase the level of the floor if necessary. Available in sheet sizes 60sm/125sm.
Coconut Mat
Made of natural materials and is extremely high sound and thermal insulation properties.
Instructions for mounting pad (fibranova or coconut)
The base must be prepared prior to application of the overlay. It should be flat, dry and free of rocks and debris with a vacuum cleaner.
In newbuilt screeds should wait until complete drying, so as not to damage the surface. Humidity should not exceed 3%
If necessary, it can be made and paronepropusklivo foil 2 mm, it should be applied with an overlap of about 20 cm foil to the wall and stand about 2 cm
Insulation boards must be laid in rows, leaving a distance of 2 mm between them. It is necessary to leave gaps temperature of about 10 mm to walls, ceilings, columns and more.
Insulation boards to be placed in the direction of the flooring. Should be avoided matching the seams of the pad and the floor.
You should not step on the pad to prevent surface damage her
Advantages of laminate flooring factory pad Selencio
When the pad is glued vibrations are reduced significantly
Resembles walking on parquet
Seller:Parquet World Company
company profile
Parquet World Company
- Company introduction:Parquet World Company was founded in 1999 in Bourgas. For those years in the market we have proved the numerous customers and partners with professionalism and integrity. To date, we have representatives in Bulgaria some of the most renowned German manufacturers of laminate flooring - Egger, Parador, Tarkett. Professional advice of our staff will help you choose the right one for you or laminate parquet. Maintaining large amounts of storage and has a team of professional installers, you have purchased a product can be obtained from you and installed in your home the same day. In addition to flooring, we strive to offer a wide range of accessories so that you get a perfect finish to your room. The company has stores in some of the largest cities in the country - Bourgas, Sofia, Varna, Stara Zagora, Veliko Tarnovo, and our products can be found in stores for a laminate of our distributors.
- Contact Person Name:З. Дубарова
- Address:Бургас, к-с Славейков, бл. 126
- Post Code:8000
- City:Burgas , Bulgaria
- Cell Phone #:0894 488888
- Telephone #:056 586878
- Geo Location:Show
