Solid fuel boiler EKO-CK P
|
- product description
- company profile
product description
Description::Heat flow is at the top rear of the boiler and not as in the previous model .
The right size firebox , keeping combustion products in three runs and additional ribbed surface for heat exchange ensures high efficiency boiler , making it sparingly.
For the case for oil or gas burner assembly is simple and quick to pre- prepared opening the lower door . In these cases it is necessary to add control for operating the burner (optional ) .
For the case of heating with pellets are pre-packaged kits . More information sets can be found here .
Large doors allow the firebox and large solid fuel heating and easy cleaning and maintenance .
When the boiler is used for indoor heating systems can be fitted with thermal insurance for the pre- prepared holes . The vents should be installed thermal exchanger (optional ) that is subsequently added termozaštitni valve .
Delivered particular boiler body , especially sheeting with thermal insulation which allows easy transport and installation and reduces the risk of damage to the installation is extremely quick and jednostavna.Montaža skin is simple and is carried out by means of screws that come with the boiler.
Combined -pass Boiler Eco RC P made of boiler plate RST37.2 ( EN S235JRG2 ) thickness of 5 mm . , Made in accordance with EN 303-5 and EN 304th The boiler is supplied with a separately packed, insulation and cladding , a thermometer and a thermostat on the pump itself . Manufacturer Centrometal
The right size firebox , keeping combustion products in three runs and additional ribbed surface for heat exchange ensures high efficiency boiler , making it sparingly.
For the case for oil or gas burner assembly is simple and quick to pre- prepared opening the lower door . In these cases it is necessary to add control for operating the burner (optional ) .
For the case of heating with pellets are pre-packaged kits . More information sets can be found here .
Large doors allow the firebox and large solid fuel heating and easy cleaning and maintenance .
When the boiler is used for indoor heating systems can be fitted with thermal insurance for the pre- prepared holes . The vents should be installed thermal exchanger (optional ) that is subsequently added termozaštitni valve .
Delivered particular boiler body , especially sheeting with thermal insulation which allows easy transport and installation and reduces the risk of damage to the installation is extremely quick and jednostavna.Montaža skin is simple and is carried out by means of screws that come with the boiler.
Combined -pass Boiler Eco RC P made of boiler plate RST37.2 ( EN S235JRG2 ) thickness of 5 mm . , Made in accordance with EN 303-5 and EN 304th The boiler is supplied with a separately packed, insulation and cladding , a thermometer and a thermostat on the pump itself . Manufacturer Centrometal
Availability:Contact
Company:Etaž d.o.o.
company profile
Etaž d.o.o.
- Company introduction:Etaž d.o.o. is a private trading company established in Belgrade in 1990. Predominant activity of the company is trading with equipment for central heating. Work commencement is based on retailing of home thermo-technical and gas installations. Today, in addition to nine specialized retail stores in Belgrade, Pančevo, Mladenovac, Smederevo and Niš and several commission retail stores in Serbia, ETAŽ uses wholesales to supply contractors and investors of large facilities with materials for central heating, including substations, pipe distribution and very wide assortment of home installations, in terms of more than 5200 products. ETAŽ is present on the market of Montenegro through company Mikro-mont - Bijelo Polje. ETAŽ is an agent/importer of products manufactured by renowned European manufacturers in the field of thermo-technical installations: Armack, Aquamax, Caleffi, Centrometal, Danfoss, ESBE, FAF, Fondital, Giersch, Henco, Herz, Junkers, Rems, Rehau and Sitem. Fitters of SPLIT cooling systems are supported with all accompanying equipment for air-conditioning systems (copper pipes, insulation, air-conditioning unit supporter, condense hoses). n accordance with balance and loss statement for 2006, ETAŽ is categorized as a medium-sized company with currently 114 employees, whereof 25 has university-level education and others with high-school education. We assist prospective buyers in material selection and recommend quality designers and contractors. We deliver purchased merchandise to the buyers, as agreed.. Call on one of provided telephone numbers and verify our business conduct and preparedness to respond your requests promptly and quality.
- Contact Person Name:Vladimir Cvijović
- Address:Šumatovačka 2
- Post Code:11224
- city:Vrčin , Serbia
- Telephone #:+381 11 805 3980
- Geo Location:Show
