EQUIPMENT FOR SUBSTATIONS - Valve flat shutter MIP Cuprija
|
- product description
- company profile
product description
Description::Flat shutter valves are the most widely used and most versatile type of tube caps. Their main use is to regulate the flow of liquid and gaseous fluids in cases of frequent opening and closing. Typical applications are in the pipeline of low pressure. Stopping or starting current is achieved by moving the spindle with the plate (mushroom) to the seat or the seat. They have good sealing properties. Globe valves can be used on all pipes and devices that are not aggressive (water and steam up to 220 C)
Specifications for safety valves
Standard fittings: DIN 86255, JUS M.C5.023, EN 13709
Standard dimensions: DIN 3300, JUS M.C5.005 F1, EN 558-1, Red 1
Standard port valve: DIN 2631, 2633, 2634, JUS M.B6.051, 053, 054, EN 1092-1, Type B 1
The construction of flat shutter valves
Housing flat shutoff valve is directly flanged to the end, made of high quality cast iron, with a recess length according to EN 558-1, Red 1 Connection flange according to EN 1092-1, Type B. The shutter is made as a separate part the connection with the spindle is safe and sound, but allows a little adjustment position. The spindle is made of stainless steel, as well as the sealing surface which is made of corrosion-resistant material directly welded to the Pump housing. Sealing screws directly performs the sealing package made from quately braid based on pure graphite with resistance to pressure and temperature, as well as chemically aggressive fluids.
The construction is in accordance with EN 13709, the maximum allowable differential pressure underside of the cap is to the required standard, but can be allowed differential pressure equal to the rated pressure if applied relief disc and flow over the top of the shutter. materials are specified in European standards, and are subject ratio pressure / temperature according to EN 12561-1.
Testing flat shutoff valves
Testing flat shutoff valve is performed on each valve in skljadu standards for testing EN 12266-1, tests P10, P11 and P12 and shall issue certificates in accordance with the procedures of certified Quality Management System according to ISO 2001: 2008 standard.
Specifications for safety valves
Standard fittings: DIN 86255, JUS M.C5.023, EN 13709
Standard dimensions: DIN 3300, JUS M.C5.005 F1, EN 558-1, Red 1
Standard port valve: DIN 2631, 2633, 2634, JUS M.B6.051, 053, 054, EN 1092-1, Type B 1
The construction of flat shutter valves
Housing flat shutoff valve is directly flanged to the end, made of high quality cast iron, with a recess length according to EN 558-1, Red 1 Connection flange according to EN 1092-1, Type B. The shutter is made as a separate part the connection with the spindle is safe and sound, but allows a little adjustment position. The spindle is made of stainless steel, as well as the sealing surface which is made of corrosion-resistant material directly welded to the Pump housing. Sealing screws directly performs the sealing package made from quately braid based on pure graphite with resistance to pressure and temperature, as well as chemically aggressive fluids.
The construction is in accordance with EN 13709, the maximum allowable differential pressure underside of the cap is to the required standard, but can be allowed differential pressure equal to the rated pressure if applied relief disc and flow over the top of the shutter. materials are specified in European standards, and are subject ratio pressure / temperature according to EN 12561-1.
Testing flat shutoff valves
Testing flat shutoff valve is performed on each valve in skljadu standards for testing EN 12266-1, tests P10, P11 and P12 and shall issue certificates in accordance with the procedures of certified Quality Management System according to ISO 2001: 2008 standard.
Availability:Contact
Company:Expont d.o.o
company profile
Expont d.o.o
- Company introduction:Expont d.o.o je trgovinsko preduzeće iz Beograda specijalizovano za promet opreme za grejanje i vodovod, osnovano 1992 godine. Nalazimo se u ulici Vojvode Stepe 153, na placu od 1100 m2, i halom od 250 m2. Pored maloprodaje u ulici Kumodraska 55 imamo još četiri maloprodaje. U sastavu privrednog društva Expont je proizvodno preduzeće Mip Livnica iz Ćuprije osnovano 1970. godine. Mip Livnica kao deo Exponta je jedini srpski proizvođač armature od sivog liva. Pored starog proizvodnog programa koji obuhvata odbojne klapne, hvatače nečistoće, kondenz lonce, usisne korpe i sl. sa 87 zaposlenih Mip danas lije i proizvodi ravno zaporne ventile, nepovratne ventile, leptir ventile, ventile sigurnosti sa tegom i oprugom, dvodelne loptaste slavine, prirubnice i ostalu prirubničku armaturu za podstanice. Preduzeće Expont preko svoje veleprodaje snabdeva trgovine, više od 700 izvođačkih firmi, od toplotne podstanice, primara i sekundara, preko cevnog razvoda pa sve do kućnih instalacija grejanja i vodovoda. Roba se isporučuje uz validan atest i garanciju, u šta su se uverile JKP Beogradske, Novosadske i ostale toplane, TE Kolubara, Kostolac i Obrenovac. Naš prioritet su mnogobrojni izvođači termo-tehničkih i vodovodnih instalacija , uz koje se preduzeće Expont razvilo, i napredovalo na srpskom tržištu. Za dugogodišnje saradnike kao i nove a korektne saradnike naše preduzeće je uvek spremno da u najkraćem roku, uz dobre cene kao i posebne rabatne skale dopremi opremu na gradilište.
- Contact Person Name:Goran Razumenić
- Address:Vojvode Stepe br. 153
- Post Code:11000
- city:Beograd , Serbia
- Cell Phone #:+381 60 641 68 32
- Telephone #:+381 11 398 20 22
- Fax #:www.expont.rs
- Geo Location:Show
