Gantry for centering Bicycle Wheel 1689
- product description
- company profile
Product Description:- material: special steel for bike- acceptable for wheels from 16 to 29 inch with or without tire - support shafts up to 157 mm width - cross axle of 20 mm or other dimensions axle wheels requires additional adapters. Specially designed for professional repair shops for bikes. Gantry can be set to clamp or fasten the desk. The standards enable simultaneous radial control of the wheel position on both sides, with the additional possibility to control radial symmetry about the hub. The shape of the control field allows simultaneous radial control of the deviation of alignment rim of the bike. The controller has plastic coated tips to prevent paint damage on the bike. The width of the backrest can be adjusted to fit the size of the wheel axles. Also is adjustable the amount of the control field, in order to adjust the diameter of the wheel. With changes at the wheel, spring upright stand and that the measure can be quickly pulled away, automatically springing back to a set position when inserting a new wheel. This enables faster truing of several same size wheels. The control centering of the brake rotor can be made with additional steps inserted into the grooves of the right strut. Additional holes are useful for storing all three dimensions of pedal 1689.3 (12, 15 and 20 mm) additional screws at the bottom of the gantry allow easy fastening desk. Important! A professional stand for centering the wheel can come out of the center after frequent use. The control arm allows to calibrate the arm back to its central position.
- Company introduction:Unior Komerc is the exclusive representative of Unior Slovenia, а company with rich tradition obliged to produce high quality professional hand tools.
- Contact Person Name:Александар
- Address:ул.36 бр.20, нас. Илинден
- Post Code:1000
- City:Skopje , Macedonia
- Telephone #:(02) 2432 057
- Fax #:(02) 2432 150
- Geo Location:Show